Oculus Rift CV1 Prescription Lens Adapter with Removable Lenses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to make it easier for me to show someone who doesn't have the same vision as me items on the Rift. This also…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 642
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
I wanted to make it easier for me to show someone who doesn't have the same vision as me items on the Rift. This also allows me to switch from my prescription to my wife's prescription easily.
I took jegstad's design and thickened the outside frame and then removed and added tabs to the portion that holds the lenses. The lense now just pop into place using the tabs. This is based off the same Zenni Optical frames and lenses as jegstad's design, Frame #450021 http://www.zennioptical.com/450021-metal-alloy-full-rim-frame-with-spring-hinge.html
Note that the lenses are pretty loose when not in the main frame adapter so be aware of the top position of the lenses as you slide them into place. Once in you should be able to "dial" the top of the lense in if it moved off center.
Edit: I've added a 43mm version of the design for the 43mm version of the Zenni Optical round frames. http://www.zennioptical.com/550021-metal-alloy-full-rim-frame-with-spring-hinges.html . I've tried to increase the ease of popping the lenses in and out, so they should fit better without the need for sanding fresh off the printer. I prefer the 43mm size lens to the 40mm.
Print Settings
Printer:
Maker Select / Wanhoa Duplicator I3
Supports:
Yes
Resolution:
.2
Infill:
25%
Post-Printing
To get an Better/Easier Fit
When first printed the tabs will be a pretty tight fit and I found sanding the tabs and the tab sockets down a little helped. I sanded, tested, sanded, tested, etc till I got a good snug fit, while still being able to slide the tabs in easily.
How I Designed This ===================
Tinkercad
It's not the world's prettiest .stl but it works.
Category: Computer