Oculus Rift CV1 Sensor Ceiling Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts your CV1's sensor to the Ceiling. The screw holes should fit #7 screws, which are about 3.5mm in diameter. FYI:…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounts your CV1's sensor to the Ceiling.
The screw holes should fit #7 screws, which are about 3.5mm in diameter.
FYI: I found that once I mounted the sensor upside down I had to go back into the setting and recalibrate the sensor, as Oculus Home had planted me partially through the floor. Interestingly none of the games had this issue and functioned fine.
Print Settings
Printer:
make
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2
Infill:
25%
Post-Printing
Mounting Suggestions
I'd suggest you use wall anchors when mounting this to your ceiling. Also if your sensor falls off your ceiling and breaks, I take no responsibility for that.
Category: Computer