Omnium Cargo Mini-Max front light gopro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front go-pro mount for Omnium cargo mini-max for mounting a light or any other object using a go-pro adapter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I developed this adapter to use it to mount a Lezyne 700 XL that has a go-pro adapter.
It will accept any other light or item using a go-pro mount and having the clearance with the frame.
The model is 51mm in diameter, letting you use some tape or protection for the bike frame.
Printed in PETG 4 perimeters 15% gyroid infill. Organic support only on the build plate.
Hardware needed:
2 M5 screw at least 16mm;
3 M5 nuts (2 for fixing the mount, one for holding the item).
After printing and removing the supports, you can either press fit the nuts in or use a welding iron to insert them. For the go-pro nuts, glue is required.
For the go-pro mount, I used the model "FreeCAD GoPro Mount" from MakerMike.
I can provide the freecad on demand.