DeWalt ToughCase countersink bit inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit holders for Countersink drill bit set in a Dewalt ToughCase (DWASTCASEBLK)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Bit holders for Countersink drill bit set in a Dewalt ToughCase (DWASTCASEBLK).
This was made specifically for the countersink drill bits that I have. Mileage may vary with other sets. There are a few slots for 1/2" drive drillbits along with a set of slots sized for imperial cylindrical shank bits.
There is a holder for the allen keys for the set screws on the counterink collars.
There are two holders for different sized collars. Press fit for 13mm, 15mm and 18mm diameter collars, but there is also a recess for magnets so it'll hold smaller diameter collars.
There is also an insert to hold 6x stubby countersink bits alternating direction.