LayersFactory
Zgłoś model
1 / 3
Hercules DJ knob with DJ deck on top — zdjęcie 1
1 / 3

Hercules DJ knob with DJ deck on top

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Akd

Akd

@Akd_3777215

A knob for your Hercules DJ deck

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
50
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane

Upgrade your Hercules DJ controller with this custom-designed replacement knob. This isn't just a standard cap; it features a rugged industrial grip body with a unique "Mini DJ Controller" modeled directly onto the top face.

Designed specifically for 6mm D-Shaft potentiometers (standard on Hercules Inpulse 500, Starlight, etc.), this knob offers better grip than the stock rubber caps and adds a custom visual flair to your setup.

Features:

  • Precision Fit: 6.2mm D-Shaft hole with tolerance for a tight, wobble-free fit.

  • Industrial Grip: Vertical knurling for no-slip adjustments during fast mixes.

  • Mini-Deck Top: A low-poly DJ controller modeled on the cap (featuring jog wheels and fader pads).

  • Ergonomic Taper: -5° draft angle for a professional feel.

🖨 Print Settings (Critical for Details)

Because this model has tiny details on the top face, standard settings might erase the fader pads. Please use the settings below.

  • Printer: FDM (Optimized for Flashforge AD5M / Bambu / Prusa)

  • Nozzle: 0.4mm (Standard) or 0.25mm (Best for details)

  • Layer Height: 0.12mm or 0.16mm (Do not use 0.28mm or the details will vanish).

  • Infill: 15% Gyroid.

  • Walls/Perimeters: 3 Walls (ensures the shaft hole doesn't crack).

  • Supports: REQUIRED. Use Tree/Organic Supports.

    • Why? The knob has a hollow skirt at the bottom and the "mini controller" overhangs slightly. Tree supports are easiest to remove without scarring the grip.

  • Orientation: Print Upright (Bottom on the build plate, Mini-Controller facing up).

⚙ Slicer "Secret Sauce" (Important!)

If the tiny fader pads on the top are missing in your slicer preview:

  1. Enable "Arachne" Wall Generator: (Found in OrcaSlicer/PrusaSlicer under Quality/Walls). This allows the printer to draw lines thinner than the nozzle for the tiny buttons.

  2. Detect Thin Walls: Turn this ON if you aren't using Arachne.

  3. Speed: Slow down the Top Surface Skin Speed to 30mm/s to make the jog wheels look clean.

Post-Processing

  • Fit Check: If the knob is too tight on your controller, gently scrape the flat side of the D-hole with a file or hobby knife. Do not force it, or you might damage your controller's potentiometer.

  • Style: Use a fine-tip paint marker to highlight the jog wheels on the mini-deck!

Tagi

encoderknobdj