Microphone Mount for back of LG Ultrawide Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a microphone mount that bolts to the back of some LG monitors and lets you hang a microphone from the back.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The intention of this model was to provide a way to get my microphone off my desk, without having to have a microphone arm hanging in my face. Since my monitors are mounted on arms that leaves the place where the original monitor stands mount free for something else to be screwed into.
After a bit of faffing about this is the result. A small box that drops down with a set of threads that lets me screw my microphone on and hang it off the back of my monitor.
The specific monitors that I use are LG 29WL550-B's but any of their displays that use the same type of stand might work out if you are putting them on a monitor arm.
One thing to note - I don't think that I have the threads for the mount completely right, but they are close enough and I printed the thing in PLA so as long as the microphone has a more durable thread than the PLA it seems to just work it's way in once I start threading things into the microphone.
When printing I do print it with the threads facing up, this does leave a plie of supports in the "box" that you have to clear out but doesn't make a mess where the slicer tries to put supports under the thread. Milage may vary on that but feel free to try it out.