18650 Battery Holder Set | Wire Channels (2-6 Cells)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of spacers (1x2 to 1x6) for 18650 packs. Features unique channels for routing balance wires or thermal sensors.
- Ocena
- 5 / 5
- Polubienia
- 208
- Pobrania
- 831
- Wydruki
- 3
- Wyświetlenia
- 1755
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
BOM: Printed with ROSA3D High Speed PLA Gray
This is a practical set of spacers designed for building custom 18650 Li-Ion battery packs. The set includes linear strips ranging from 2 cells (1x2) up to 6 cells (1x6).
The Main Problem Solved: Standard spacers are often solid blocks. This design features dedicated triangular voids between the cells. These channels are perfect for routing BMS balance wires or inserting temperature sensors (thermistors) deep into the pack without wasting space or crushing the cables.
The Set Includes:
1x2 Holder
1x3 Holder
1x4 Holder
1x5 Holder
1x6 Holder
Key Features:
Perfect Alignment: Keeps cells parallel for easy spot welding.
Wire Management: Cleanly route cables through the pack structure.
Modular: Combine strips to create packs of any width.
Printing Instructions:
Material: PETG, ABS, or ASA are strongly recommended. PLA may deform if the battery pack gets warm.
Supports: None required.
Walls: 2-3 perimeters for strength.