Bonewing Dreadwyrm | 32mm & 75mm Fantasy Miniature | FDM & Resin

☠ Bonewing Dreadwyrm

Huge Undead (Dragon), Chaotic Evil

Armor Class 19 (natural armor)
Hit Points 225 (18d12 + 108)
Speed 40 ft., fly 80 ft.

Saving Throws DEX +5, CON +11, WIS +6
Skills Perception +11, Stealth +5
Damage Resistances necrotic, cold, lightning; bludgeoning, piercing, and slashing from nonmagical attacks
Damage Immunities poison
Condition Immunities poisoned, exhaustion
Senses darkvision 120 ft., passive Perception 21
Languages understands Draconic but cannot speak
Challenge 14 (11,500 XP)

Traits

Undead Fortitude.
If damage reduces the Bonewing Dreadwyrm to 0 HP, it must make a CON saving throw (DC 10 or half the damage taken, whichever is higher). On a success, it drops to 1 HP instead.

Graveflight.
While flying, the Dreadwyrm emits a chilling aura. Creatures within 10 feet must succeed on a DC 16 WIS saving throw or be frightened until the end of their next turn.

Bone Shrapnel.
When the Dreadwyrm takes a critical hit, shards of bone explode outward. All creatures within 10 feet must make a DC 15 DEX saving throw or take 3d6 piercing damage.

Actions

Multiattack.
The Dreadwyrm makes three attacks: one with its bite and two with its claws.

Bite. Melee Weapon Attack: +12 to hit, reach 10 ft., one target.
Hit: 21 (2d12 + 7) piercing damage.

Claw. Melee Weapon Attack: +12 to hit, reach 5 ft., one target.
Hit: 17 (2d8 + 7) slashing damage.

Tail. Melee Weapon Attack: +12 to hit, reach 15 ft., one target.
Hit: 19 (2d10 + 7) bludgeoning damage.

Necrotic Breath (Recharge 5–6).
The Dreadwyrm exhales a wave of shadowy energy in a 60-foot cone. Each creature in that area must make a DC 18 CON saving throw, taking 54 (12d8) necrotic damage on a failed save, or half as much on a success. Creatures reduced to 0 HP by this breath rise as skeletons under the Dreadwyrm’s control for 1 minute.

Character Created in assistance with Tripo3D.

Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.

⚙ Print Specs

• Supports: Standard tree auto supports

• Category: Characters & Monsters

• Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)

• Material: Resin or PLA+ for best detail retention

• Scale: Heroic 1:10 (adjustable for tabletop use)

• Orientation: Crouched pose with daggers supported

🧱 FDM Printing

• Use Tree Supports (Default) for optimal overhang coverage.

• Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.

• Recommended materials: PLA+ or PETG for best surface finish.

• Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.

• Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.

🧪 Resin Printing

Use the following settings for reliable, high‑detail results:

Printer: Elegoo Saturn 4 Ultra 16K

Exposure Settings:

• Layer Height: 0.05 mm

• Bottom Layers: 5

• Exposure Time: 2.75 s

• Bottom Exposure Time: 37 s

• Transition Layers: 10 (Linear)

• Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s

Advanced Settings:

• Anti‑Aliasing: Level 8

• Print Time Compensation: Enabled (0.93 s)

• Light PWM: 255

• Bottom Light PWM: 255

Supports & Orientation:

• Use Auto Orientation and Auto Supports (Light) in ChituBox.

• Ensure proper drainage and avoid flat surfaces directly on the build plate.