5 port ethernet switch enclosure (HK-S5GER)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple enclosure for a cheap 5 port gigabit ethernet switch from Ali Express (HK-S5GER). USBC/PD for power
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
The switch module is a HI-COM HK-S5GER. I bought it from this link: https://www.aliexpress.us/item/3256809708277447.html
For power, there is a small USB-C PD module. These are very generic and don't seem to have a model number or similar. I got mine from this link: https://www.aliexpress.us/item/3256809777258469.html
If either of those links go down, I have included pictures from the Ali Express listings so you can visually search for similar.
I removed the screw terminals from the USB-C module and the DC jack from the switch PCB and soldered the two directly.
Pay close attention to the DIP switch/jumpers on the USB-C module; you don't want to negotiate 20v for a switch that only needs 5v!
Please ignore the mix of red/black... this is a "hidden away" part and I had two spools that - together - gave me enough grams to print.
I did this quickly with .6mm and PETG and the the parts do fit well enough; .4mm and slower will probably yield better results.
The USB module is supported by a small sled/insert. The parts to friction fit but I decided to add a bit of hot-glue to secure things.
I have included basic STEP files for the PD module and the switch PCB as well should you wish to roll your own for non commercial use.