1 / 2
Dayton Audio SAB-1060 Sim Racing Amplifier Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for the DIY amp board for running base shakers through SimHub.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Sim Racing Enclosure for SAB-1060 from Dayton Audio
uses banana plugs for connecting speaker wire
includes holes for USB, standby switch, External PSU connector.
Printed with PLA and PLA-CF (only for the texture) with no issues so far with heat.
Washers are optional if you use CF injected materials since Carbon Fiber is conductive.
Video On Install:
