Matterhorn Alpine Marmot "Murmeli"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alpine marmot sitting on a stylized Matterhorn mountain base.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I couldn't find a 3D model of an Alpine marmot online, I generated an AI picture of one, converted it using a 2D-to-3D generator, and then made some modifications.
I cut out a section of the mountain and placed the marmot there—I apologize for the off-center placement.
The supports are difficult to remove. If I revisit this model, I will change the position. The marmot should also have a tail, but I couldn't figure out how to place it better.or even put more MURMELIS everywhere... share your thoughts ;)
It was printed at a height of approximately 13 cm with a layer height of 0.2 mm. The supports under the belly are a pain to remove...
Hope you enjoy :)