1 / 4
P3Steel z axis rod top MRZ105Z — zdjęcie 1
1 / 4

P3Steel z axis rod top MRZ105Z

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an alternative for centering the top of the Z axis threaded rod tor the P3Steel frame. My frame is from…

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
128
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is an alternative for centering the top of the Z axis threaded rod tor the P3Steel frame.

My frame is from Orballo, and it has a hole on the top for passing the threaded rod through, it is 12mm in diameter.

My threaded rod is 5mm.

I had a few MRZ105ZZ bearing in my stock. These have a 10mm external diameter, 5 mm internal diameter and 4mm thickness.

This part was designed to have one MRZ105ZZ inserted in it and then the whole assembly would be inserted in the top hole in the frame, thus keeping the Z axis centered.

Print Settings

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

100

Notes:

printed in ABS, required some cleaning.

designed part has no tolerance for shrinkage, it is a tight fit !

Post-Printing

An MRZ105 bearing must be inserted in the part.

How I Designed This

Designed in OpenSCAD, could be parametrized easily.

Category: 3D Printer Parts

Tagi