Bullet Bill Mario world
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looks like Dummy13 is in trouble..
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey there, we put our first step in the 3D model/print world, very happy of this one even if it can be improved in many ways. I hope you like it !
You will need to assemble the different parts, very easy to do if you printed it well, you will only have to glue the arms and paint the black part of the eye.
We printed in 0.10mm height and low speed (8h printing) You will need support + skirt for the arms, Skirt for the Canon axe part 1
Our speed settings :
Perimeter = 70 mm/s
Small perimeter = 50
External perimeter = 50
Infill = 120
Solid infill 140
Top solid infill = 25 (it was just to improve quality you can speed up this one)
As said before we're just starting so if you have any advice to improve anything, it will be greatly appreciated <3
Same if you have any question leave a comment, enjoy !