Glow Stick holder with light regulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two pieces, one inside of the other, spin the inner one and you can regulate the output light of a chemlight/glowstick
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi there :3!!
I'm back at it again, this time I bring you a glowstick light output regulator.
It's made out of two pieces. One slides into the other and the inner one spins closing/opening the little window that lets light through.
A 6" (15mm wide) Chemlight should fit perfectly, I personally recommend placing some electrical tape to make it harder to twist it and some in the cap of stick to fully prevent it from emitting light. In the cap's tape I have an habit of writing the date of manufacte of the light as well as the color.
It has a belt clip to hang it from a backpack or from anywhere it fits.
I used supports for the clip, 0.2 layer height.
If your 6" glowstick doesn't fit, its usually the diameter's fault. For some reason the ones I bought from a dollar tree had a tolerance of ± 0.5mm (surprise, I know xD) and wouldn't fit. For that matter, I made a 16mm version that still barely holds the thinner variants.
Have an exceptionally great day :D!!