insta360 X5 Dummy Battery and Cover - Original Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dummy Battery and Battery Cover for the insta360 X5 Camera in the Style of the Original Battery.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is Dummy Battery and Battery Cover for the insta360 X5 Camera which matches the Style, the Size and the Clip-Function of the original Battery.
It protects your Camera when no Battery is installed.
I made a Sister-Model which is thicker and sticks out so you don't mistake it for a real Battery.
There are two Versions:
Full Version with 4 printed Parts
just the Cover with 3 printed Parts (Just leave out the "Battery" Part)
All Parts printed seperately (not Print-in-Place) so you don't need any Supports and can choose the Color for every part.
A tiny bit of Superglue is needed for Assembly. No Screws or Magnets.
Check the Photos for glueing Instruction.
If you want to match the curved Style of the Cover i would recommend to print it with as small layer height as possible. I used 0,08mm on my A1 mini and it looks really good.
For all Parts: a 0,4mm Nozzle is recommended.
Changelog:
added a new Cover-Version with an Arrow, so no guessing how it goes in
If you experience any problems or have suggestions please feel free to comment or drop me a message! :-)