Quans UV LED Flood Light Resin Curing Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a Quans 20w UV Light (Note: affiliate link) after I had purchased a resin printer to cure the prints once…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I bought a Quans 20w UV Light (Note: affiliate link) after I had purchased a resin printer to cure the prints once they had completed. I wanted to have a box that was opaque to be able to cure them most effectively, so I designed this and printed it up on my FDM printer. The light sits in the top perfectly and holds the lamp while not allowing much light to escape from the box. I printed it in all black because of how I am using it, but I'm sure that any fully opaque color will work as well.
I don't know if the 10w light is the same dimensions as the 20w, but it may work. YMMV.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Yes
Notes:
You will need a printer that has a bed size of an Ender 3 or larger because of the size of the print.