Chess Hercules DJ Knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All of the chess pieces well designed as knobs for the Hercules DJ sets!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
I have designed and developed a unique set of Chess DJ Knobs, transforming a classic concept into a modern, functional accessory. Each knob is crafted with a focus on style, durability, and precision, ensuring not only a visually striking appearance but also a high-quality tactile experience.
I love chess and I love music and DJ's so I wanted to design something that I love.
Works with a standard DJ encoder.
There is an option to print all of them!
Printing
Nozzle size: 0.4mm
Layer Height: 0.2mm
Filament: PLA or PETG
Supports: YES (minimal)
Assembly
Very simple assembly
1st: Remove the knob using this knob remover, Put the remover under the knob and push the remover HORIZONTALLY
2nd: Align the hole and push down gently, Once it is on you did it good job!
I have no Hercules equipment so I have no way to test them but they most likely fit because looking at the measurements I made sure they were spot on accurate with mine.
Safety tips:
IMPORTANT: BE GENTLE when removing and putting caps back on.
You may need to use a small plastic card or tool to lever them off and remove your original caps. A bit of lube may help the installation.
Do not perform any lateral movement with the caps, Please.
Happy Printing and Enjoy!