Flywoo Flylens 85 Battery Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a battery mount that I created for the Flylens 85 to eliminate the fiddly TPU battery holders that Flwoo supplies with the drone. It permits access to the FC USB-C port without having to disassemble anything.
It weighs approximately 1.6 grams when printed from standard PLA, and is plenty strong.
It attaches to the drone using 2 M2x6 screws fastened into the brass press nuts on the frame. The 3 shallow voids on the top of the mount are then filled with silicone conformal coating in order to provide grip for the battery preventing lateral movement. You can also use E6000 adhesive for this, though it attracts more dust, and gets compacted more. I use a 10mm velcro strap.