1 / 6
HEQ G-Port Mount (DJI O4 Pro) for Drone Co. Cinner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the HEQ G-port (DJI O4 Pro).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the HEQ G-port (DJI O4 Pro) for the Drone Co Cinner. The DJI O4 Pro needs to be mounted to the bottom side of the HEQ adapter plate and then zip tied tied to the printed adapter piece. There is a slot near the bottom for a 6s balance lead as well as two holes towards the middle for the 2x antennas for the DJI O4 pro and 1x set of holes for an immortal T antenna for the Rx.
Electronics needed:
2x 9v BEC
DJI O4 Pro
ELRS --> SBUS Rx
1x 12v BEC
HEQ G Port
Powered via 6s balance lead.
