1 / 1
FFBeast Quick-Release with USB Passthrough
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added mounting holes for magnetic pogo-pin connectors. If you plan to use them, I recommend buying the versions with the wires already soldered, doing it yourself is difficult. If you only have the bare connectors, you can push the magnets out of the housing, solder the wires, and then press the magnets back into place.
In my setup, the female connector is on the wheelbase and the male connector is on the wheel. That’s why the hook includes a radius on the top side, it provides clearance for the connector profile.
I'm using this with this encoder and slip ring mount for the usb passthrough