Water Resistant AirTag Case Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple air tag case using M3 x 6mm socket head bolts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This two-piece AirTag case assembly is designed for strength, precision, and everyday durability, secured using four M3×6 mm socket head bolts with threads formed directly into the printed plastic—no nuts or inserts required. Integrated mating alignment features ensure accurate assembly and a consistent seal, enhancing the case’s water-resistant performance when properly tightened. For best results, print both parts at 20–30% infill for an ideal balance of strength and weight, and take care not to over-torque the fasteners to prevent stripping. This design is optimized for clean printing, easy assembly, and reliable protection of your AirTag in demanding environments.
You could put a ring of silicone, very thin, around the raised circular mating feature to improve the water resistance... I think in general, this will keep water out unless fully submerged.