Fully Parametric M5 Sim Racing Hub Spacer — 60 mm PCD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of strong, customizable sim racing wheel hub spacers designed around the 60 mm M5 bolt pattern. Includes three rea
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This spacer set is made for anyone running a 60 mm M5 sim racing wheel hub and needing extra reach or improved driving ergonomics. You’ll find three STL models in fixed lengths 35 mm, 50 mm, and 75 mm.
To secure the wheel, six M5 nuts are needed. The spacer has recessed pockets sized for them.
For those who want to tweak dimensions or adapt the design for other bolt patterns, the Fusion 360 parametric file is included. Every key measurement is driven by parameters, making it easy to create your own custom spacer size or modify the interface.
Printing Recommendations
Perimeters: 8–10
Infill: 40–60% (i used adaptive cubic)
Material: Any strong filament (PETG, ABS, ASA, or reinforced PLA)
Supports: Not required for the spacer interiors on most printers
Orientation: Print upright for maximum strength around the bolt pattern