Fox Racing Speedframe Improved Visor GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This improved mount includes channels for zip ties
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This replaces the stock Fox Racing Speedframe GoPro visor mount with one that uses zip ties. I recommend printing in TPU 95A at .16 Optimal with 5 wall loops (P1S). This makes the upper part solid, but allows the bottom to conform to the curvature of the visor. It grips at least as well as hard plastic and won't snap like hard printed parts under clamping force. The TPU UV resistant and doesn't rattle and is soft to the touch. An approximately 7.5 mm flat to flat nut fits in the hole. I don't have any issues with the nut rounding out the hole. There's more flex in the visor itself than any the TPU would have. I still used 3M double sided tape just to prevent any twisting. Zip tie slots are 5mm wide.