1 / 2
Oneida Dust Deputy Reinforcement and Gasket — zdjęcie 1
1 / 2

Oneida Dust Deputy Reinforcement and Gasket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Reinforcement back plate and TPU gasket for Oneida Dust Deputy.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The bucket lid my dust deputy was installed on cracked after several years of usage. I decided to make a backing plate to try and reinforce the lid and a new gasket to replace the original foam piece.

Tagi