MMU3 Segment R4 for use with ECAS04 connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the MMU3 cassette assembly by replacing the collets with a ECAS04 connectors
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Making another buffer but didn't have any of the collets that came with the original MMU3 kit but had plenty of ECAS04 connectors. Made the collet hole larger to accommodate the ECAS04 connector. I used these ECAS04 connectors: Amazon.com: 50 Pcs Pneumatic Valve Connector Head PTFE ECAS04 Components Air Control Valve Connector Replacement Kit for Extruder 3D Printer : Industrial & Scientific.
I found out that I could modify an existing cassette to use the ECAS04 connectors by carefully using a 8mm drill bit to enlarge the collet hole. I used a small vise to ensure both halves were clamped tightly together before drilling.