Magic Trackpad and Keyboard Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ones I found were too large to print in one piece on my Bambu P1S so I made my own. Designed with couch use in mind.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 519
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
BEST WITH 4x M3 Button Head screws, I used 8mm but length doesn't matter all that much. The setup will function without the screws, but I wanted no risks of detachment.
I am using the Magic Trackpad Gen 2 with Lightning Port (Model A1535), as well as the Magic Keyboard Gen 2 with Lightning Port. The Trackpad Gen 2 has a corner radius of 9mm. From visual inspection of Magic Trackpad v2 vs v3 reviews, I see the Gen 3 Trackpad has a larger corner radius, so I believe the Gen 3 Trackpad should fit in the cutout with no issues.
Align the charging port of the keyboard into the center of the charger cable cutout. Use the 4 screws to fix the keyboard in place. Do note that the screws will scratch the keyboard if you don't use the tiny antiscratch washers I've also thrown into the files list.
The trackpad needs to be removed to be charged.