FocusBug Antenna protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Antenna protector for the 3 modules of the FocusBug measuring devices. They are designed to be sandwiched between the…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 1211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Antenna protector for the 3 modules of the FocusBug measuring devices.
They are designed to be sandwiched between the devices and the small NON SQUARE metal pieces. Pay attention to the fact that the metal threaded piece is not square and therefore requires to be placed correctly for the protector to work. I've designed it with the orientation following the device. Vertically for the main brain and horizontally for the sensor itself and the extra reader.
I've printed mine in PLA with no issues yet. PETG is going to be a nightmare with the support removal process.
And yes supports are required.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15
Filament: Prusament PLA PLA Custom Section ==============
print in this orientation with this amount of support
Category: Camera