Nucleus-M Ring Holder + battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified the design from the WCU holder to make it work with Nucleus stuff Basically, you can store your ring and…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 1220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Modified the design from the WCU holder to make it work with Nucleus stuff
Basically, you can store your ring and battery on your focus stand
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Filament:
PolyMaker PLA
Notes:
You'll need a few m3 bolt and screws to make it work :
For the Superclamp mount :
2x M3 hex nuts
2x M3x8 Socket Head Cap screw
They will act as an antitwist mechanism
To mount the male part of the quick release on the ring holder
4x M3x10 Socket Head Cap screws
4x M3 hex nuts
To mount the battery holder on the ring holder:
4x M3 brass insert
4x M3 x 10mm Countersunk Head Screw
Category: Camera