Eaglesmoss / Fanhome Star Trek Ship Stand Risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm and 80mm stand risers for Star Trek ship models from Eaglemoss / Fanhome etc.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
As my starship collection grew I wanted to setup a more tiered look to my display case, so I designed these risers that can replace the black oval base that comes with these models.
Available in two sizes: 80mm tall and 40mm tall.
Also available in hollow and solid models. The hollow models still have a solid upper section (everything above the squared base section). If you choose to print the hollow version you may need to use supports. If you printer is well tuned for bridging then it is possible to print the hollow version with no supports.