1 / 1
Dice Tower with Fold-Up Trays (stronger, better alignment) - 131mm tall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3DCentralVA's having fold-up trays & "2-player" is pretty convenient, so I improved it. See other remix for larger dice.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (10)Powiązane
I recommend using the supports I included. The origin is set the same as the model (use supports marked "square" for the tray with ends marked "square") so that you can use the "Join" feature of your slicer. You could also use your slicer to mark the supports as supports but they may be slightly weaker that way, and they are small so there isn't much of an advantage to that.
See my 196mm remix to fit certain slightly larger 7-piece dice sets.