Christmas Tree 7" - 2 piece for mailing - Exposed Infill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Free-Standing tree is Press-Fit together. Exposed infill and optional LED provide a unique visual point of interest.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
This two-piece ornament is designed with exposed infill to create a unique artistic effect. Each piece is about 1/8" thick, making it suitable for mailing.
To achieve the transparent infill look, I used these settings: Walls: 5, Infill: 30% (Archimedes), Top/Bottom: 0 to leave the interior open. You can experiment with other infill patterns for different visual effects. The increased wall count adds strength, while the top/bottom were not printed, which exposes the infill. There are dozens of infills available for you to try.
You may need to adjust the opening widths in your design for proper fit. The pieces are designed for a strong press-fit (0.13 mm clearance side-to-side) and slip together to form a standalone tree ornament. I added a flexible tongue to reduce the precision needed for the press fit.
NOTE: Printables.com rejected the gcode for both models with text. After numerous attempts to determine why the gcode was rejected, I removed the text from both models and made the gcode from these revised models. This gcode was accepted by printables.com. Please use the STLs, which have the text, to generate your gcode. The gcode made from these models with text worked for me.