Right Tray for Pi with USB ports accessible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the right tray (Tray R) from https://www.printables.com/model/570982-aquila-electronic-front-trays.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like the simple design of the original, but wanted access to the USB/RJ45 jacks of my BTT Pi 1.2, so I created this.
You'll also want to print mirrored versions of the original "Lid L" and "Fan Shroud" to provide additional cooling, so the pi doesn't cook itself.
As a bonus, I also tweaked the front and center splines from the original, a bit.
They'll hold themselves in in place while gluing, and will technically work without the glue, but that's not the intent.
I also cut the center spline down to 40mm, so you'll want to print 2. This was done so I could safely print them on end to maximize strength, while minimizing print failures.