1 / 2
Subnautica Survival Knife - 4 Colors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The basic survival knife from Subnautica
- Ocena
- 4,667 / 5
- Polubienia
- 469
- Pobrania
- 1990
- Wydruki
- 37
- Wyświetlenia
- 12 243
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 37) (Komentarze: 50)Remiksy (0)Kolekcje (518)Powiązane
Use this blueprint in your fabricator, along with 1 unit of silicone rubber and 1 unit of titanium.
But seriously...
Print one half and then mirror it and print the other half. Each half is split into 4 pieces, so you can print it with the Mosaic Palette or the Prusa MMU. You can also print the pieces separately and glue them together.
This is a remix of pavelplus's design from Thingiverse. The blade is separated, the ring is expanded, and the STLs are aligned correctly for multi-material printing.