Sel Soul Stamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soul stamps from the Sel system. Both the system stamp and the one from Emperor's Soul
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Soul stamps from the Sel system. Both the system stamp and the one from Emperor's Soul.
For the stamps themselves you'll want to print those in TPU (I used 95A from Polymaker and Overture and had good luck, idk for other types) and I've used a 0.25mm nozzle to keep the details.
0.25 nozzle setup:
In prusa slicer -> Filaments tab -> "Compatible printers condition" (visible in expert mode).
In that section you want to change the nozzle_diameter[0] constraints to allow .25 nozzles, ie nozzle_diameter[0]>=0.2
Here is what that setting has for my custom generic flex profile:printer_model=~/(MK4S|MK4SMMU3|MK3.9S|MK3.9SMMU3)/ and nozzle_diameter[0]>=0.2 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.8 and ! single_extruder_multi_material
For the handle of the Emperor soul stamp I used one of the handles from here and scaled it so the diameter was 50mm.