Teaser Wand Cat Toy Fix and Converter Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed teaser wand cat toy parts, threaded parts are compatible with PetSmart wands and toys.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
These teaser-wand cat toy parts are designed to help you repair, replace, or convert different cat toys so you don’t have to juggle a bunch of separate wands. They let you adapt toys from different brands to a single wand, which is especially useful if you’ve only got one cat or just a lot of toys.
The parts were modeled around the PetSmart style threaded wands, but I haven’t yet tested them with other threaded systems.
Print Settings
I had the great results printing them upright, and using default print settings with supports on build plate only. The parts can be printed without supports, but the quality was noticeably better with them enabled.
All parts were tested in 95A TPU (Okay), PLA (Better), and PETG (Best). None of them broke during normal play with my cat, but I did stress-test them manually. For heavier attachments or more energetic play sessions, the Stick to M-Threads Adapter holds up best when printed in PETG.
Assembly
String to F-Threads Adapter
Feed the toy’s string through the top opening of the adapter, tie a secure knot at the end, and then pull the toy to seat the knot in place (see pictures below).


Stick to M-Threads Adapter
Apply a small amount of glue to the end of the stick you want to repair or convert, then insert it fully into the adapter.
Stick End Piece
Apply a small amount of glue to the end of the stick you want to cap, then slide it into the end piece until secure.