Semester 1 Final Project Christmas Tree Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a Christmas tree that slowly decreases in height to give it depth. I also hoped to mimic the effect of distance.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was my final project for semester one of PLTW Engineering Essentials. These were the instructions that I had to follow. Also tomorrow I will update it to have a spot to thread a hook or wire through so you can hang it on your Christmas tree.
Project Goal
Design and model a low-profile, winter-themed decorative tile or coaster that adheres to strict size and print time constraints. The final product must be a functional and aesthetically pleasing piece that utilizes the full 2-day modeling window and tests your ability to design for fast production.
Constraints & Requirements (Strictly Enforced)
Requirement | Specification | Notes |
Theme | Winter (e.g., snow, ice, holidays, animals, patterns) | The design must clearly reflect a winter theme. |
Max Dimensions | 3 inches x 3 inches x 0.25 inches (76.2 mm x 76.2 mm x 6.35 mm) | You may use the full 3x3 base, but cannot exceed 0.25 inches in height. |
Modeling Time | 2 Days | You have two full class periods to complete the modeling and export the .3mf file. |
Max Print Time | Under 35 Minutes | The slicer estimate for the final model (using standard PLA settings) must be less than 35 minutes. Your low height (0.25") is the key to meeting this. |
Submission | Final 3MF file | Submitted via this Schoology assignment. |
Phase 1: Concept and Approval
DUE: End of Day 1
Sketch: On paper or digitally, create a detailed sketch of your winter tile design. This sketch must include:
Top-Down View: Showing the intricate design or pattern.
Side View (Profile): Clearly showing the overall height (0.25 inches) and how the design is recessed or raised.
Dimensions: Label the 3x3 inch base and the 0.25 inch height.
Rationale: Write a brief paragraph explaining how your design addresses the winter theme.
Submit for Approval: Show (Insert Teacher’s Name) so she can mark you as approved on IC with 5 points.
Modeling and Export (Day 1/Day 2)
DUE: End of Day 2
Model the Base: Create a 3 x 3 inch square base that is exactly 0.25 inches tall. Add a small chamfer or fillet to the bottom edges for better print adhesion.
Integrate the Design: Use modeling tools (such as Extrude-Cut or Extrude-Add) to incorporate your approved winter design onto the top surface of the tile. Remember: The total height of the piece cannot exceed the 0.25-inch limit.
Export: Export your finished model as a high-resolution .3mf file and submit it to schoology