Bath and Body Works Wall Flower Refill Holder, Stackable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a neat little holder to store your refills.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Just a small disclaimer: I am not responsible if you fail to stack correctly/poorly and they leak or get damaged from falling/tipping over.
Your printers accuracy may determine whether or not the base/extensions will snap into place or be slightly wobbly. BE CAREFUL and make sure it's stable before you start stacking. If need be, you may need to glue together or slightly scale down whatever you need to by .5% or 1%
I made to where it can be stackable or not. If you do not wish to stack them, then you can just use the Cap and finish it with just the shelf.
The corners have been cut out of the Refill Holder Shelf just to save that little bit extra on filament and gives a neat look.
Everything should already be in the correct orientation when you import the STL's into the slicer, no supports should be needed, ( if they orientated correctly when they imported, lol ).
Hopefully..., a stackable wall mount version will be coming soon. :D