1 / 8
Printable modular fishing lure - hardbait - swimbait - wobbler — zdjęcie 1
1 / 8

Printable modular fishing lure - hardbait - swimbait - wobbler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable modular fishing lure - hardbait - swimbait - wobbler

Ocena
0 / 5
Polubienia
26
Pobrania
99
Wydruki
0
Wyświetlenia
607
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Printable modular fishing lure - hardbait - swimbait - wobbler

I made this model in modular design, so you can build your own lure with so many segments you want.

There are files for the head, body, back  and tail, there are also pearls for the spaces between the parts. You can print it lightweight as a wobbler with 2 walls and 10% infill, or heavier and faster sinkable with 6 walls so you don't have infill at all.

There is one design with eyes and one without, you can print two sets in different colors and swap the eyes... or print all eyes black, or red. The eyes need to be glued.


The lure has following length:

without middle part (body.stl)  - ca. 45mm

with one middle part - 55mm

with two middle parts - 65mm.

The files are scalable, 150% is my favourite.


For the assembling, you will need following parts:

 a fine leader, made from steel, titanium or tungsten, 50-60cm long with loops on both sides. 

Further you will need an additional split ring and a hook. 

The last step is  mounting a split lead, 4-6mm diameter. Please leave 3-5 mm distance to the head.

 


I uploaded files wilh all parts in one file and all single parts too.

I wish you a lot of fun with printing and fishing.
 

Tagi