Bluetooth to CDI Replacement Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple replacement snap enclosure for Maartje Eyskens' Bluetooth to CD-i adapter.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
Do YOU have Philips CD-i brainrot? Well if you have a Bluetooth to CD-i adapter, here's something that can be useful!
I made a simple replacement snap enclosure. The PCB is friction fit into place with modeled standoffs and no other hardware like screws are required to close it up.
I modeled this because the old enclosure was very difficult to remove the PCB from due to the way it was modeled, and because the print quality left something to be desired (mine was warped from poor adhesion and had quite visible defects).
Credit to Maartje Eyskens for the excellent Bluetooth to CD-i adapter which makes CD-i games tolerable using modern controllers! You can read more about it here, but it seems like the project is on hiatus.
This was printed on my Artillery Sidewinder X1 using PolyLite Silk PLA at 210 degrees, 0.2 layer height. I normally use a 0.6mm Nozzle, but I recommend 0.4 because of the smaller details like the logos, and PCB standoffs.