1 / 12
pokemon kanto starters christmas tree decor / ornament — zdjęcie 1
1 / 12

pokemon kanto starters christmas tree decor / ornament

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

pokemon kanto starters X reindeer

Ocena
0 / 5
Polubienia
6
Pobrania
13
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Standard Digital File License

Here's the kanto starters pokemon: charmander, bulbasaur and squirtle in reindeer version. One set only has antlers while the other set has a red nose like rudolf.

features
✅ tested
✅ support free
✅ 6 STL's pack
✅ two versions per model
✅ reindeer versions: antlers only and with red nose

Note: for personal use only. Do not sell nor distribute my STL's

Let's connect ;D
Show me your makes of my models. Say hi and connect with me at fb/IG/twitter/TikTok: zirenspar

Settings Guide
• no support
• nozzle diameter: 0.40-0.60mm
• infill: 10% lightning mode worked for me
• you might need to use brim to ensure the model sticks to bed
• recommended layer height: 0.16 or lower. Maybe 0.20 will also work if you have good part cooling fan.

I used 0.16 layer height on my test prints without supports. Please use adequate cooling to ensure the antlers can be printed smoothly. Check lift head or slow down for layers lower than 10 seconds for adequate cooling.

Tagi