Magnetic Connectors for 4in Dust Collector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various magnetic connectors/adapters for 4in dust collector system
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Additional Magnetic connectors/adapters Inspired by the 4in dust collector magnetic connectors created by Joel M.
https://www.printables.com/model/837371-4-inch-dust-collector-magnetic-fittings
These models were designed to better suit the dust collector system installed in my shop. The magnetic connectors allow for moving the flexible hoses to different machines and minimizing the amount of ductwork/hose required to run to every machine. I use a short section of flexible hose from each machine with the female magnetic coupling and move male connector/hose from machines as required. I am calling the male connector the coupling half with the slip flange.
The Coupling blank can be used as a vacuum gate or to close of hose end on machines not in use.
I plan to use the shop vac hose adapter to connect the dust collector system to smaller tools and as a regular suction hose to collect sawdust around machines and off the work bench
I printed the models in petg and asa for durability. I used 15-20% infill. I used D42 N52 magnets from K&J Magnetics and used every other hole in the couplings. On the blanks I used all the holes but alternated magnet poles so that it could be used on male or female connectors.
