1 / 5
3.00 x 1.925 Drift Sleeve 002 for Traxxas Rustler 2x4 and 4x4 Trucks — zdjęcie 1
1 / 5

3.00 x 1.925 Drift Sleeve 002 for Traxxas Rustler 2x4 and 4x4 Trucks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a drift sleeve for the rims I have designed for my and my son's Traxxas Rustlers. The original 3.00 x 1.925…

Ocena
0 / 5
Polubienia
19
Pobrania
108
Wydruki
0
Wyświetlenia
616
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Here is a drift sleeve for the rims I have designed for my and my son's Traxxas Rustlers. The original 3.00 x 1.925 rim I designed for off-road use is here. and the additional rims I designed are here. I'll have to find the model for the "Swirl Rim" shown in the pics.

Here are some 0.85" wide rims and tire for your front wheels as well.

I print these in TPU with 4 perimeters and 6 layers top and bottom with triangle infill because it seems gyroid infill and TPU don't necessarily get along well.

I use thick superglue to glue the sleeves to the rims. I run a bead down between the rim and sleeve about 1/4" down on each side, which covers most of the bonding surface between them. I just shove the tapered tip of the glue bottle in there and squeeze and run it around, then make sure the rim and sleeve are lined up and wipe the excess off with a paper towel.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2mm

Infill: 

25% Triangle

Filament: AmazonBasics TPU Black

 

 

 

Category: R/C Vehicles

Tagi