Traxxas 3.00 x 1.925 Rims for Rustler 2x4 and 4x4 Trucks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EDIT 2 Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look. EDIT 1 I…
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 473
- Wydruki
- 2
- Wyświetlenia
- 1922
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
EDIT 2
Here are the 0.85" wide rims and tire for the front of your 2WD if you want that dune buggy look.
EDIT 1
I added rim design 011 through 014. I also slightly modified rim 008 by adding an 0.030" fillet on the top edges.
ORIGINAL
My son wanted some drift wheels for his Traxxas Rustler 4x4 so I designed some sleeves that fit the 3.00 x 1.925 rims that fit his truck. Since the two rims I have designed were primaily for offroad, I made them quite beefy. Since there are very low (comapared to offroad) forces on these drift sleeves, I designed some different rims that I thought looked cool. I am currently printing rim 007 right now, and I'll update you guys and let you know how well they hold up soon.
So, here are the original rims I designed that work fine for offroad.
The drift sleeves are here. The paddle sleeves are here.
I print them in PLA with 3 perimeters, 6 top and bottom layers and 25% gyroid infill. I know it's probably overkill, but I don't care.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
25% Gyroid
Filament: Hatchbox / AMZ3D PLA Any
Notes:
These should be printed with the outward facing side of the rim up, and supports enabled.
Category: R/C Vehicles