Centauri Carbon lightweight Cowling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lighter weight cowling with different styling but fully stock parts compatible
- Ocena
- 5 / 5
- Polubienia
- 191
- Pobrania
- 397
- Wydruki
- 6
- Wyświetlenia
- 3141
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Who is this for
It is for those seeking a different style Toolhead design that is still compliant to the stock parts as this allows upgrading just the front, back or middle piece or a various combination of the 3. All 3 parts are lighter then their stock counterparts. It introduces some small upgrades reducing rattle coming from the cowling itself.
stock cowling(just plastic parts): 80g
this shroud: 55g(petg), ~44g(asaCF)
What you need(BOM)
2x 6x3mm magnets
rest is all stock hardware carried over
for assembly
flush cutter/knife for support removal
drop of glue for the magnets
Print Recommendations
because of heat deflection - min. petg better petgf/asacf or similar
2 Walls ~0.4 Linewidth
4 Top / 2-3 bottom layer
Arachne recommended
support and Brim required for "Mid" Cowling Part
recommended to print parts individually
suggested Print orientation
Supports
Some Support is already builtin. Please remove slowly with help of a knife or flush-cutter. Additionally its recommended to add slicer supports for the marked(in green) areas of the Mid Part. The other parts dont necessarily need supports or a brim.
Version History
v08b - release Version