Neptune 4 UBBI reverse bowden rotated 90 deg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a remixed model with the UBBI rotated 90 degrees
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is a redesigned model and similar to the original, but with the UBBI rotated 90 degrees to be able to connect the runout sensor in front using this UBBI model.
This is the filament HUB model used in the photo.
It does not require additional screws compared to the stock version of the printer.
If you want to add the runout sensor as in the photo, I'm still working on the cable extension to be able to return to the stock configuration, currently I have ordered these 3 pin JST-XH cables, updates will follow.
UPDATE: Done! The extension cable works with the ones in the provided link, but they require soldering. Be careful with the length, I had to remove the cable tray on the top.
If you print it, please post your makes and let me know if you have any improvements or suggestions!