Incra "Build-It" Clamp Holder for Pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple clamp holder for the Incra "Build-It" clamps to get them out of the way when I am not using them.…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simple clamp holder for the Incra "Build-It" clamps to get them out of the way when I am not using them.
Hook part 2 to the pegboard, then slide part 1 on it. There isn't really a need to lock or glue them together, since they don't move too much in the two weeks I have been using them.
You lift the clamp into the tooth on the top of part two and rotate the clamp down to sit on the shelf. Each set can hold 4 clamps with a little space between them.
I added a picture to show how I printed them. You can print them how you want, but the way shows removes the need for supports for part 1.
Not much else to say about them.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20% Cubic
Category: Tool Holders & Boxes