PreciseBits Collet, Locknut and Wrench Holder for Pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of keeping the collet and lock nut assemblies in their original cardboard boxes because after two years,…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I was tired of keeping the collet and lock nut assemblies in their original cardboard boxes because after two years, the boxes were getting pretty beat up, so I designed and printed one.
I have all three sizes of collets available, so I made a holder that holds them all and the wrench.
It is made for 1/4" holes in the pegboard and 1" spacing on the pegboard holes.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20% Cubic
Notes:
I guess it's not holding a lot of weight, so 20% infill with 2 walls and 4 layers top and bottom should work fine. That seems to be working just fine for me right now, but I only put it together an hour ago.
It needs 2 #4 or #6 flat head wood screws. The lugs really hold it tight, but the screws are necessary to keep them from slowly walking apart over time.
Post-Printing
Step 1 - Remove supports.
Yup, that's it.
Category: Tool Holders & Boxes