Sodastream to soda plastic bottle adapter - no supports, functional.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter for plastic bottles, using the integrated seal of the sodastream machine.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Print it upside down 🙃, no supports required.
A simple adapter to enable the use of common soda bottles with sodastream machines.
Ideally for 0,5 L bottles, as they fit the machine. But larger bottles also work, of course. I even did it with a 1,5 L bottle (or was it a 2 L ?), by taking the sodastream out of its foot.
I tested following brands : Schweppes, Coca-Cola, Sprite, Pepsi, Orangina, San Pellegrino, Vals, Mezzo-mix...
Seems like those bottle threads are standardized, at least in France and Germany.
💥⚠ Caution ! ⚠💥
do NOt use STILL WATER bottles !
Beware !
Inappropriate bottles can burst if the pressure gets too high !
Normally a valve in the sodastream lets gases escape to limit the pressure to a maximum value, which most bottles should be able to withstand. Normally, only soda and sparkling water bottles should be compatible with this adapter. But still, do not try bottles of non-sparkling beverages.
I once overcharged a 1 L Vals bottle while I was in a hurry. The bottom of the bottle exploded, causing it to launch like a rocket, punching through the head of the machine. I found pieces of it all over my room, and of course had all the water spread on my lap and on the floor.
Probably the valve of the sodastream was unable to lower the pressure while I was still injecting CO2. So yeah, be careful. It's only water, but the pressure can be harmful. Model : Sodastream Genesis.
Don't worry too much though, I've kept using this adapter since 2022, without any other problem.
This is my original creation, without inspiration from the Internet. I created it in 2022, and did four iterations to get to this version.