Cable entry/exit hole for a desk or shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable management "hole" to fit into a hole drilled in a desk or shelf.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 105
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you drill a large hole in a desk for cables to pass through, this model will fit in and cover the raw edges of the hole. Includes a lid with a cutout to fill the space around the cables once you've passed the plug end through.
By default this is designed to push fit into a 44mm (more or less 1.75 inch) diameter hole, cut out with a suitable hole saw tool. The original design for this is parametric so I may post some other predefined sizes eventually.
The lid pushes in to the base and will clip in place so it won't fall out easily, but can be removed when you need to pass more cables through.