Ender 3 X-axis cover with an adjusted endstop position
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If the position of your BL / CR Touch blocks your toolhead from hitting the endstop, this is the solution.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model came into existance after I've installed a 5015 satsana fanduct with a CR Touch mount which made my toolhead miss the stock position of the endstop. It simply didn't reach it.
This is an elegant solution which moves the endswitch closer to the front of the printer.
It includes a guide for the endstop cable and an optional cover cap to hide the switch and the screws.
In the files you can see two versions of the cap, the only difference between them is the position of the studs so choose depending on which screws you have mounted to the stepper motor.
To sum up:
Moves the endstop towards the front of the printer
hides the endstop behind a cap
Includes a cable guide
The CR Touch 5015 satsana fanduct I used can be found on Thingiverse under the name "Satsana 5015 CR-Touch" by IngIsrael.